autumnal leaves tutorial

Thank you for stopping by. I made a few autumnal cards the other day, with leaves made from gold card stock. I was asked a few times how I made the leaves. So here a tutorial on how I made the leaves. I made two versions, one plain and one embossed.

I cut two sets of leaves with the tattered leaves die from Tim Holtz.

I embossed one of the set of leaves with a corresponding embossing folder to give it more definition.

Here you see the difference of the plain and the embossed leaves.

I added some colour to the gold leaves by dabbing some alcohol inks on them. This way they look more like autum leaves.

Here again the difference between plain and embossed.

I wanted to give the leaves a bit of a tattered look so I covered them with black paint.

I let it dry a little and then wiped the excess off. This gives the leaves more depth.

I got these tiny note cards in a sale somewhere and decided to distress them a little to add to my card that I am making with the leaves.

I made a background for my leaves by cutting a big postage stamp and stamped it with a mesh stamp. I then sprinkled frantage embossing granules over it and heat set it by heating  from underneath the paper so the granules don't blow away. I love this look.

I inked my card base, and stamped my note card and now put it all together.

I wrapped a ribbon around the postage topper and tied it in a bow. I stuck it to the base and glued the leaves and the sentiment card on the card and voila!

Thank you for visiting and I hope you have a crafty day!

Take care and hopefully until next time.

Frederique

Heat emboss resist

I made a card today for Thanksgiving and my friend AnnaMarie asked how I did it. So I felt another tutorial popping in my head. And here it is!

This is what I used:

a card blank, a topper, a stamp, embossing ink and clear embossing powder, a die cut sentiment and the Wink of Stella clear brush. Oh and stamping ink.

I stamped the image on the card topper with embossing ink and sprinkled it with clear embossing powder.

After heatsetting the embossing powder I started covering the topper with a darker colour distress ink using my blending tool... The darker you ink the more the stamped image pops.

I covered the whole topper and inked the edges even darker to frame it.

To make it all tie together, I stamped the same image with the same distress ink on the card blank.

Again I inked the edges to frame it. 

I cut a sentiment with a Quietfire Design die that I just love!

I add some sparkle with a clear wink of stella brush. It makes the sentiment stand out more.

And this is the finished card after I glued it all together. 

Now you can give it a go yourself. I love this technique.

Thank you for stopping by and until next time.

Take care,

Frederique

xxx

a masking tape tutorial

The other day I was watching a youtube video from Jennifer McGuire about faux metal embossing. She used distress inks and mica powders to create a background. That inspired me to play with masking tape, distress inks and mica powders too. I have lots of them and rarely use them.

So here a step by step on how I make one of those cards.

I used a piece of white card stock, a card blank, distress inks, blending tools, masking tape (I use frog tape for delicate surfaces), mica powder and a brush. Oh and some embellishments.

I put the tape down to make a pattern.

I ink up the card stock with distress ink and a blending tool. I prefer to use more than one colour so it pops a bit more.

In this case I used Cracked pistachio and abandoned coral distress ink.

Because distress ink stays wet a bit longer it is easy to use a mica powder. I decided to use a yellow one to give it a nice golden glow. I use a fluffy brush to dust it on the ink. 

To fixate the powder I spray it with a mini mister. Mica powders normally have a binder in it that is activated by water.

While the cardstock is still stuck down I dry the mist with my heat tool. This way it stays nice and flat.

I gently remove the masking tape and reveal the uninked parts of the card stock.

This is what the card looks like after I stuck the piece of card stock on the card blank and embellished it with a sentiment die cut and a stamped and coloured in cupcake.

Here you can see the yellow shimmer of the perfect pearl powder.

I hope you enjoyed the process and will give it a go yourself!

Take care and maybe until next time....

Frederique 

xxx

shaker card tutorial

Shaker cards have been around for a while but I have only recently started making them. And as I was showing them on my fb page, people kept asking me how I make them. So here a photo tutorial of how I make my shaker cards.

The basics you need for a shaker card are a frame, a background, a card blank, some acetate or plastic sheet and ofcourse shaker content.

 I die cut this Tim Holtz window frame and stuck the acetate on the back using double sided tape. This will be the front of my shaker.

 on the back of the window I stick foam tape. I normally stick two layers to give the sequins and glitter some room to move.

 Here you see the two layers. You need to make sure there are no gaps as glitter or other small parts could escape.

I fill the shaker with sequins, glitter and beads, and sometimes I use little punched figures for some interest. Here I used punched snowflakes that I coloured with Wink of Stella shimmer.

I take the backing of the double sided tape and stick my background piece on the back of the shaker. This way it has a nice background and you can mount it much easier to your card base.

Now the shaker part is ready to be stuck on the card and I can embellish and stamp the card.

I stuck the shaker on the card blank using double sided tape. I can now stamp the sentiment and embellish the window.

And this is how the finished card looks like.

I hope this was helpful and that it will help you make some too!

Until next time,

Take care.

Frederique
xxx

Bubble tutorial

Hello blogger,

Today I want to share a technique of making bubbles look more realistic. People keep asking how I make my bubbles look so bubbly.

First of all you need a good quality stamp. All my bubbles and droplets stamps are from www.designsbyryn.com. I love the crisp prints and the rubber is of such a quality it will last forever.

With this tutorial I am going to show the way I do it on darker paper. It is the same as on light card stock but I am skipping a step as I am not going to lift ink off the background.

I start with a nice quality card stock...

I mount the stamp on my block. I prefer thinner blocks as they bend a little so I can make crisper prints of larger stamps.

as my background is grayish, I like to stay in the same color scheme so I am stamping in gray Archival ink.

I cover the whole surface with the bubbles as I want it as a background and not a feature image.

I take a white gel pen and start highlighting.

 Here you see the difference between the highlighted ones and the plain stamped bubbles.

 After I was done I didn't want to cover it up too much so I turned it into a shaker card. The turtle is also a stamp by designsbyryn... The sentiment is a die cut from Tim Holtz /sizzix.

I hope you enjoyed my little tutorial and if you have any questions or comments I would love to know.

Until next time, take care.

Frederique

#12tagsof2015 by Tim Holtz

Hello dear reader,

It has been a while since I crafted and even longer that I have blogged.

The June tag of the #12tagsof2015 by Tim Holtz was the perfect opportunity to write here again.

As I don't have the dies he used I had to improvise. As luck would have it, my hubs surprised me with the coffee blue print stamp set (among other sets), so I used one of the coffee stamps to make my tag.

I love the way it turned out.

Until next time... I hope I get the time to blog more often ;-)

Take care,

Frederique
Xxx